How to get rid of mold
How to get rid of mold has been a matter of heart for many people these days and for good reason. Indoor humidity and mold are associated with a variety of adverse health effects, including wheezing, coughing, allergies, respiratory tract infections, and exacerbation of asthma. Ensuring that your home is mold-free is essential to your health.
Believe it or not, most molds aren’t really visible, but they’re floating in the air, so you need to take the mold and signs of moisture in your house seriously. But how to get rid of mold? The best way to manage mold in your home is to eliminate or limit the conditions that need to grow, such as the soil, dust, and other water and nutrients available in the crumbs around your home.
While The best humidifier It’s great for pumping moisture into dry air during cold weather, but it’s not an ideal choice if you have a mold-prone home. Dehumidifiers, on the other hand, can do a great job of removing excess water from the air to prevent mold growth. Here, we will look at how to remove mold, such as cleaning techniques and moisture removal.
How to get rid of mold
According to a study published in Indoor airIndoor moisture and mold can have a serious impact on our health and cause pro-inflammatory reactions in the body that can contribute to a variety of respiratory illnesses. Removing mold from your home is essential to staying healthy.
Mold can be very harmful to your health, so make sure you are wearing proper protective equipment when cleaning it.The US Environmental Protection Agency (EPA) People who may clean the mold and inhale mold spores are advised to wear an N-95 face mask, gloves and goggles.
According to a 2004 report by Medical LaboratoriesThere are some signs of water problems, such as paint peeling, wet spots, wallpaper wrinkles, plaster cracks, and wood distortion. The report also recommends a thorough examination of parts of the house that are susceptible to mold growth, including basements, crawling spaces, attics, foundations, and often wet areas such as bathrooms and kitchens. I am.
Mold growth on cleanable surfaces needs to be effectively disinfected. Throw away anything that cannot be cleaned. Hard surfaces such as ceramic tiles, glass, concrete and stone can disinfect mold, but depending on the level of contamination, materials made of paper, gypsum board, fibers or other soft porous materials may need to be discarded. ..
by EPA, Can be effectively cleaned with a mild detergent. The use of chemical cleaners such as chlorine bleach is not recommended for regular cleaning, but can be used in more serious situations.
To prevent the growth of mold EPA It is recommended to keep the humidity in the room below 60%, ideally 30-50%. A hygrometer is an inexpensive tool for measuring the amount of water in the air. If the humidity in your house is above 50-60%, you can use a dehumidifier to remove excess moisture from the air. Air purifiers are also useful for moldTherefore, you may find it really beneficial to invest in one of these along with a dehumidifier.Please see the guide The best air purifier For more information.
How to get rid of mold in the bathroom
Depending on the number of people living in your home and how often they take a shower or bath, the bathroom can always be damp. To get rid of that moist air from the house, it is most important to run the bathroom fan or open the windows while taking a shower.
If you see signs of mold, try to clean all surfaces of the bathroom more often. If the windows, walls, and pipes are still damp, show them and then dry the wet surface completely. If it is difficult to control the humidity in the bathroom, consider using a dehumidifier to control the humidity and prevent mold growth.
Items in water-damaged areas and homes should be dried within 24-48 hours to prevent mold growth. If there is potential for mold growth, act swiftly to prevent it. Mold can damage any surface on which it grows.
How to get rid of mold under the sink
As with the bathroom, excess water can accumulate in the kitchen through activities such as cooking, washing dishes, and boiling water. When cooking or washing dishes, activate the exhaust fan or open the windows to allow moisture to escape.
If you notice water damage under the sink, check for water leaks. Sinks often have leaks where the drain of the basket seals the sink or water trap. You can figure out where the leak is by blocking the drain, filling the drain, checking for leaks, then discharging water and monitoring the leak.
To clean the existing signs of mold, scrub with detergent and water and then dry completely. This can mean not using the sink until everything is completely dry.
How to get rid of musty odor
If your home smells damp but you don’t see any visible mold, there may be hidden flood damage. Check for signs of mold on the back of walls and panels, under the carpet, and around pipes and ducts. It is not recommended to remove a large amount of mold. This is because it can release mold spores throughout the house. Work with experienced professionals in these situations.
Excessive water can enter the house and frozen pipes can burst during storms and other heavy rains. In any of these emergencies, you must act swiftly to dry the wet area as soon as possible. These emergency measures include turning off the water mains of the house, clearing the drainage pipes, running a dehumidifier in the affected room, and pumping or vacuuming water from the house.
It may seem counterintuitive, but EPAIncreasing the heat in your home can stop the humidity. Warm houses have less condensation. With excellent insulation and double glazing, it keeps the heat in the room and does not create a cold surface for condensation to occur. It is also important not to paint or crimp existing mold. The paint will come off, the mold will worsen, and the odor will increase.
Make sure that fresh air can easily flow through your home. Mold can form in moist areas that are still airy. A gap between the furniture and the wall allows fresh air to circulate around the furniture. Cupboards and cabinets should be open and well deflated to prevent moisture buildup.
References
Mold, moisture and a quick guide to your home.. (March 25, 2022). USEPA. Acquired from April 20, 2022 https://www.epa.gov/mold/brief-guide-mold-moisture-and-your-home
Holme, JA, Øya, E. , Afanou, AKJ, Øvrevik, J. , & Eduard, W. (2020) characterization and pro-inflammatory potential of indoor mold particles. Indoor air, 30(4), 662–681. https://pubmed.ncbi.nlm.nih.gov/32078193/
Medical Laboratories. (May 25, 2004). Wet indoor space and health.. National Academy Press. Acquired from April 29, 2022 https://nap.nationalacademies.org/catalog/11011/damp-indoor-spaces-and-health
What are the main ways to control the humidity in your home? (November 4, 2021). USEPA. Acquired from April 29, 2022 https://www.epa.gov/mold/what-are-main-ways-control-moisture-your-home
How to get rid of mold
Source link How to get rid of mold
